Before we start
- Floor plan or photos of each room; whether the home is new, under construction or already lived in.
- What annoys you today — lights left on, curtains, AC schedule, security checks.
- Number of family members and who needs which control.
- Whether you want voice control, and with which assistant.
The installation process
- 1
Needs mapping
1 visit
We start with how you live, not with devices.
- Room-by-room list of lights, fans, AC, curtains, locks, cameras and appliances to control.
- Everyday scenes such as 'Good night', 'Away' and 'Movie'.
- Priorities and budget, so the system can be phased.
- 2
Technology and protocol choice
2–4 days
The choice depends on whether walls can be opened.
- New builds can use wired in-wall switches and controllers — most reliable.
- Existing homes often use retrofit modules behind current switches with no wall damage.
- A single hub or gateway keeps different devices working together.
- 3
Network and wiring preparation
1–3 days
Smart devices depend on a strong network and clean power.
- Wi-Fi coverage checked room by room; access points added if needed.
- Neutral wire availability checked at switchboards; wiring corrected where necessary.
- Dedicated power and protection for the hub, router and switches.
- 4
Device installation
2–5 days
Switchboards are opened and devices fitted by qualified electricians.
- Smart switches, dimmers, curtain motors, thermostats and sensors installed room by room.
- Heavy loads on correct-rated relays; everything labelled for future service.
- 5
Programming scenes and automations
1–2 days
This is where the home starts to feel intelligent.
- Scenes combining lights, fans, AC and curtains with a single tap.
- Schedules, sunrise/sunset triggers and motion-based rules.
- Manual wall switches always keep working as a fallback.
- 6
Voice, app and integration
Half a day
One simple app and optional voice control for the family.
- Assistants such as Alexa or Google Assistant linked.
- Integration with gates, intercom, CCTV and access control where installed.
- Separate user accounts and permissions for family members.
- 7
Testing and handover
Half a day
Everything is tested for reliability, including what happens when internet or power drops.
- Offline behaviour verified — core lighting must still work.
- Family walk-through and written guide.
After installation
- Keep the hub and router on a UPS.
- Apply firmware updates on a schedule, not mid-evening.
- Review automations after a few weeks and refine what annoys you.
- Add rooms and devices in phases as you get comfortable.
Frequently asked questions
Can I automate an existing home?
Yes. Retrofit modules fit behind existing switches without breaking walls.
What if the internet goes down?
Local control and wall switches keep working. Remote access and voice control may pause until it returns.
Is it safe from hacking?
We use strong passwords, separate networks where practical and avoid exposing devices directly to the internet.
Can I start small?
Yes. A hub plus one room is a fine start, and the design allows adding more later.
Timings are typical ranges. Your site survey confirms the actual schedule. See our Home Automation solutions